DRAINAGE
LATEC'S NEW MOTOR CONTROL ELECTRONICS FOR LASERPLANE ANALOG MASTS
Replacement for defective motor control and increment/decrement boards
 
The new Latec mast electronic upgrade replaces both the motor control board and the increment/decrement board with a single plug-in replacement board built around a sophisticated micro computer.
 
Electronic motor control upgrade
          Benefits
  • faster searches
  • fewer trips to the repair shop
Features
 
The new electronics also incorporate a serial I/O port, which introduces a host of new features to the mast. All of the control box functions can be duplicated from a dumb terminal, and several new commands have been added, such as continuous search and locked-in mode changes.
LATEC'S GPS TILE MAPPING SYSTEM
Our GPS Drainage Tile Mapping System is the only system designed for the drainage contractor's needs.
 
Our GPS mapping system has been specifically designed from input we received from our farm drainage contractors who wanted a simple, yet rugged way of mapping the location of drainage tile as the tile is being installed by the tile machine. 
Using the Trimble Ag GPS front end, the LATEC MDU (Memory Display Unit) will automatically record up to 30 maps or as much as 500 hours of GPS data. The MDU operates from 7 to 35 volts, and only displays the information you need on its easy to read alphanumeric backlit display. The waterproof MDU is then removed from the job site, and connected to a PC with Windows software, which loads any or all of the maps stored in the MDU.
Once in the computer, the maps are stored as disc files that can be added together, edited, scaled and printed. The sophisticated features are superior to many of those found in most graphics programs.
 
Benefits
  • tile maps are being drawn to scale while you install drainage tile, saving you time and money
  • once stored on your computer, existing lines can be easily located
  • software program provides enhanced map printouts including dimension lines, flow direction, notes and labels
  • Quick setup and easy to use
 
 
Features
  • rugged weatherproof Memory Display Unit (MDU) designed to mount on drainage machine
  • up to 500 hours of memory storage before downloading is required
  • simple to operate with only two switches which start recording tile and stops recording tile
  • the optional automatic recording feature eliminates manually pressing the record switch allowing for hands free operation
  • easy to install  
Easy to use Graphic Interface
With the user tool box you can :
  • add old and missing tile lines
  • add flow direction lines
  • add latitude and longitude benchmark points
  • add actual dimensions of the tile lines and spacings
  • add notes to your maps
  • delete any or all points
  • overlay new tile lines with old maps and produce a new complete map
  • scale the tile network using the on-screen grid
  • colour code tile sizes
     
Click here to download a brochure in PDF format
LATEC'S LEVELMASTER PLOW SLOPE CONTROL SYSTEM (LM1 & LM2-D)
Increase your productivity with the LevelMaster, the most versatile, efficient and rugged slope indicating system for the drainage industry!
 

LMI Display Box dimensions
      4.5" x 3" x 2.5" (L x H x W)

LMII-D Display Box dimensions
      6" x 3" x 2.5" (L x H x W)
VERSATILITY...
The LevelMaster displays and hydraulically controls the attitude slopes drainage plows. It can be easily moved from your drainage plow to your dozer or motor grader blade. It works on anything from 8 to 35 volts DC. These days you need to maintain your competitive and technological edge, and the LevelMaster can help.
 
EFFICIENT...
Having the ability to continuously monitor the actual real time grade as tile is being installed eliminates the guesswork and rework in soft bottom conditions and hilly ground.
 
RUGGED...
The LevelMaster system was designed for use on the job site. The connectors are weatherproof and both the display and sensor box enclosures are rugged and weatherproof.
  
AUTO DISPLAY INTENSITY...
LevelMaster's auto display was developed for all lighting conditions. An indicator is no good if you can't see it, right? You'll see this one even in direct sunlight. Our indicator also automatically adjusts to a "moon glow" setting when operating in the dark.
 
   HERE'S HOW IT WORKS...
Specifications
LM1
LM2-C
LM2-D
 Easy to read
X
X
X
 LCD display for easy setup and offset input  
X
X
 Indicates grade +3% to -3% @ 0.05% steps
X
X
X
 Control grade +3% to -3% @ 0.10% steps    
X
 Control grade +25% to -25% @ 0.50% steps

 
X
  
 Rugged waterproof enclosures
X
X
X
 Weather proof connections
X
X
X
 Software adjustable sensor filtering & valve
 gains 		 
X
X
 12/24vPT and PWM and Danfoss variable
 flow rate hydraulic output 		  
X
X
 Sensor box has electrolytic gravity sensors
X
X
X
 12v or 24vdc power operation
X
X
X
 Calibrated mount included
X
X
X
  • Level the sensor to your blade
  • Dial the desired slope (e.g. 3.0%) into the control box
  • Simply follow the LED lights to your desired slope or in automatic mode, the LevelMaster controls the slope for you
  • Green light on display = desired slope

LM1 = LevelMaster I
LM2-C = LevelMaster II for General Construction
LM2-D = LevelMaster II for Drainage Plows

LevelMaster comes complete with installation instructions, all mounts and cables for easy installation.
SLOPE LASERS
 
NEW! FUTTURA LT-710 SLOPE LASER
An affordable, automatic true self-leveling single slop laser with –10% to +15% grade capacity.
The LT-710 is an easy-to-use flat laser with LCD display for digital slope readout.
Rugged, reliable, and accurate, the LT-710 is designed for any level or sloped application,
and can be packaged with a standard receiver
or the CR5 combination hand-held, rod or machine mounted receiver.
 


RECHARGEABLE
Features
  • Fully automatic true self-leveling in level and slope mode makes it easy to set up, whether flat or slope-on-grade.
  • 1,000 ft (300m) radius range with 1/16" accuracy at 100' (1.6mm @30m) with visible spotting beam to eliminate multiple set-ups and covers even the largest jobsite.
  • LCD digital slope input with 0.01% increments and 0.01% grade accuracy provides superior slope-on-grade accuracy throughout the grade range.
  • Smart Charging technology senses when battery is fully charged and stops charging increasing battery effectiveness and life span.
  • Simple four-button operation for all laser functions makes the LT-710 easy to operate and eliminates mistakes or confusion on the jobsite
 Applications
  • Concrete forms and footers
  • Grading and excavating
  • Sloped concrete pours required for runoff
  • Parking garages and ramps
  • Site preparation and dirt grade
  • Septic beds and short-run sewer connections
  • Any level or sloped grade applications
HAND-HELD LASER RECEIVERS
 
LATEC SNAP COMBINATION RECEIVER
The most versatile laser receiver in the industry!
Snap is designed for all rotating lasers - for grade rod mounting for surveying and layout plus it is the
most value-added machine mounted laser receiver with magnetic mounting for heavy equipment.
Includes heavy-duty grade rod clamp.
Ideal for...
  • Backhoes
  • Dozers
  • Box Blades
  • Excavators
  • Skid Steers
  • Rod Mounted Readings

Mount it to your rod or snap it to your machine!
 
Features
  • Works with all rotating lasers
  • Dual powerful magnets allows for multiple mount capability
  • Large 5" laser capture height allows the user to quickly find and monitor the desired depth
  • Multiple mount capability
  • LCD display and adjustable volume control for rod use
  • 160 hour battery life
  • Strobe light rejection allows the user to work efficiently in all lighting conditions
  • Bright simultaneous LED grade lights for easy viewing from machines
  • 240° angular reception for maximum laser visibility
  • Rugged Lexan™ housing stands up to harsh construction environments
Machine Mounted
  • Ideal for backhoes, excavators, dozers, skid steers and box blades. Works on both sides of the dipper stick.
  • Dual powerful magnets for quick, secure mounting to equipment.
  • Bright flashing LED grade indication lights are easy to see from the machine (Green = on-grade,
    Red = high and low).
  • Adjustable accuracy - fine and wide to meet your job site requirements.

Grade Rod Mounted
  • Ideal for general-purpose elevation control around the job site. Use to check form work, footers and site preparation.
  • Additional receivers increase the productivity of your laser.
  • Bright LCD indicates high, low or on-grade as well as battery, beeper and volume status.
  • Additional features include selectable beeper volume control, heavy-duty rod clamp and automatic shut-off.
    SNAP Specifications
     Built-in Strobe Light Rejection works on any job site
     Laser Capture Height  5"
      Receiver Accuracy

     Grade rod mode 5 mm (3/16")
     Machine mode - fine 10 mm (3/8")
     Machine mode - wide 25 mm (1")
     Operating Temperature  -20° C to 50° C (-4° F to 122° F)
     Battery Life (2 x "AA")

     180 hours minimum
     Auto Shut-Off  30 minutes
     Reception Angle  240°
     Out-of-level warning  Yes
     Warranty  2 years
     Waterproof  100 %
     Weight  3.6 kg (8 lbs.)
    LATEC SNAP SR-RD COMBINATION RECEIVER WITH WIRED REMOTE DISPLAY
    Remote capability improves productivity by allowing jobsite functions to be performed faster and more efficiently. With the convenience of a remote display, the operator is able to view grade information from within the cab.

    Ideal for situations where the receiver is out of sight of the operator, such as trenchers, scrapers and excavators.
    LATEC SNAP & WD-5 BLUE TOOTH (WIRELESS) RECEIVER
    Enjoy the convenience of wireless technology - now available for the CR5 Receiver. Because it's wireless, the setup is easy, with no cables to worry about. Ideal for any machine. The package includes in-cab display and SNAP Receiver.
    Features
    • cable-free flexibility
    • 30 m (100 ft) working range
    • low battery indicator
    WD-5 Specifications
     Built-in Strobe Light Rejection works on any job site
     Laser Capture Height  5"
      3 Accuracy Settings

     ±1/16"
     ±1/4"
     ±1/2"
     Operating Temperature  -20° C to 50° C (-40° F to 122° F)
     Battery Life (2 x "AA")

     180 hours minimum
     Auto Shut-Off  30 minutes
     Reception Angle  240°
     Out-of-level warning  Yes
     Warranty  2 years
     Waterproof  100 %
    Introducing the revolutionary new digital inclinometer
    LEVELMASTER LM5 ELECTRONIC SLOPE METER
    		Features:
    • 25% pm numeric readout slope display
    • 6.0% pm LED bar graph
    • Set slope functionality
    • Real-time slope display
    • Internal sensor
    • Expandable
    Applications:
    • Drainage Plows
    • Scrapers
    • Dozers
    Click here to download a PDF brochure